Eurathane® 3000

What is Eurathane® 3000

Eurathane® 3000 is a premium single-component polyurethane membrane based on pure elastomeric hydrophobic polyurethane resins, which result in excellent mechanical, chemical, thermal, UV and natural element resistance properties.

MAKE AN ENQUIRY BROCHURES SPECS
  • Roof
  • Balconies, terraces and verandas
  • Internal and external wet areas
  • Pedestrian and vehicular traffic decks
  • Stairways
  • Exposed system
  • High performance, high solids content
  • Tar-free
  • Single-component
  • Cold applied directly by brush, roller, squeegee or trowel
  • Cold applied by airless spray
  • On-moisture-cured
  • Tough, seamless elastomeric waterproofing membrane
  • Can form both an exposed or protected system
  • Excellent flexibility and elongation
  • Can be applied over complex shapes
  • Easy to apply
  • Can be used on a wide range of applications as its flexibility allows underlying materials to expand and contract
  • Excellent durability reduces future maintenance costs
  • Excellent substrate adhesion
  • Cost-effective

Surfaces on to which Eurathane® 3000 is to be applied should be dry, smooth, sound and free from honeycombs, protrusions, voids, laitance, dust, loose material, paint, oil, incompatible curing agent or any other contaminants. Blockwork should be smooth rendered and brickwork flush pointed. For extremely porous substrates or special substrates, apply adequate amount of Eurathane® primer and allow it to dry.

Eurathane® 3000 should be stirred with a low speed drill with a purpose made paddle before application. It should be applied by roller or brush to obtain a continuous, unbroken film. Two coats are recommended, allowing the first to dry prior to application of the second. A dry film thickness of 0.8 mm is recommended over concrete and block surfaces.

Eurathane® 3000 should be applied at a rate of 1.5 kg/m² for a 2-coat application. Application must be made uniformly to avoid pinholes and repair them should they occur.

As with all waterproofing treatment, it is essential that Eurathane® 3000 is protected from mechanical damage during subsequent construction work unless in exposed applications.

PROPERTYVALUETEST METHOD
Specific weight1300 kg/m³-
Service temperature-40 °C to 80 °C-
Drying time @ 25°C6 h-
Re-coat time @ 25°C6-24 h-
Tensile strength8 N/mm²ASTM D412
Elongation500 %ASTM D412
Shore A hardness70ASTM D2240
Water vapour transmission0.8 g/m² · hASTM E96-93
QUV accelerated weathering testPassed 2000 hASTM G53
Adhesion to substrate2 N/mm²ASTM D4541
Water vapour transmission0.8 g/m².hASTM E96-93
Tensile strength8 N/mm²ASTM D412
Elongation500%ASTM D412